Water Cooled Load Bank

● ZENITHSUN Water Cooled Load Bank is circularly cooled by flowing tap water ( or distilled water or other liquid). compare to the highcost of traditional deionized water, flowing tap water is much lower and more affordable.
● Both AC Load Bank and DC Load Bank can be made into Water Cooled Load Bank.
● ZENITHSUN has rich experience to manufacture water cooled load banks, and customized solution is available.
● Protection functions are options: Short circuit, over-current, over-voltage, over-load, over temperature, fan fault, audible and visual alarm device, etc.
● It can be designed with RS232 or RS485 to connect with PC for store and download test datas, or for remote controlling.
● Compliance with standards:
1) IEC 60529 Degrees of Protection Provided by Enclosures
2) IEC 60617 Graphical Symbols and Diagrams
3) IEC 60115 fixed resistor for use in electronic equipment
● Installation environment:
Installation Height: ≤1500 meters ASL,
Ambient Temp: -10℃ to +50℃ ;
Relative Humidiry: ≤85%;
Atmospheric Pressure: 86~106kPa.
The installion place of load bank should be dry and ventilative. There is no flammable, explosive and corrosive materials around load bank. Due to resistors are heaters, the temperature of the load bank will be higher and higher, there should be leave some space around the load bank, avoid the influence of outside heat source.
● Please note custom designs may be available. Please speak to a member of our sales team for more information.